 |

|
EZ-Bend 3.0 Cable >>>
Available in riser, plenum, and low-smoke zero-halogen constructions, the EZ-Bend 3.0 Cable is the ideal solution for in-home wiring applications, and can be routed around corners, and behind moldings and furniture with the same practices as copper.
|
EZ-Bend® 3.0 Cable (232.78 KB)
EZ-Bend 4.8 Cable >>>
Available in indoor/outdoor, riser, plenum, and low-smoke zero-halogen constructions, the EZ-Bend 4.8 Cable is the ideal solution for in-home wiring applications, and can be stapled or glued in place with the same simple practices as copper.
|
EZ-Bend® 4.8 Cable (232.35 KB)
EZ-Bend Factory-Terminated Assemblies >>>
The robust, leading-edge EZ-Bend Assemblies offer all the advantages of bend-insensitive EZ-Bend Cables plus the benefits of factory-tuned termination. OFS’ EZ-Bend Assemblies allow for customization (i.e, cable diameter and construction, length, etc.).
|
EZ-Bend® Factory Terminated Assemblies (249.81 KB)
AccuRibbon® DC Cable >>>
A totally dry-core cable containing absolutely no gels or messy filling compounds allowing for significant improvements in handling and installation time.
|
AccuRibbon® DC Cable (452.93 KB)
AccuRibbon® DuctSaver® FX Cable >>>
The AccuRibbon DuctSaver FX Cable is an innovative cable, specifically designed for air-blown installation applications. The AccuRibbon DuctSaver FX Cable helps maximize installations due to its small outer diamter.
|
AccuRibbon® DuctSaver® FX Cable Brochure (378.94 KB)
Fortex™ DT Armored Cable (377.77 KB)
Fortex™ DT Light Armor Cable (360.3 KB)
Fortex™ DT Single Jacket Cable (372.74 KB)
MiDia® FX PLUS Cable >>>
A ground-breaking, reduced-diameter cable that can dramatically lower the cost of fiber optic deployment while maximizing capacity in congested metropolitan networks.
|
MiDia® FX Plus Cable Brochure (454.66 KB)
Mini C2™ Cable >>>
The Mini C2 Cable is a compact and cost-effective 2700N (600 lb) rated armored cable. Size-optimized for a maximum of 12 fibers, this small lightweight design helps reduce deployment costs, and facilitates easy handling and installation.
|
Mini C2™ Cable Brochure (324.61 KB)
Mini C2™ DT Cable >>>
The OFS Mini C2™ DT Cable offers a compact, yet durable fiber cable solution in a completely dry design that is easy to handle and install. The core of this cable contains no messy filling compounds.
|
Mini C2™ DT Cable (476.47 KB)
Mini LT Flat Drop Cable >>>
The small, lightweight Mini LT Flat Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of an optical network, particularly in a fiber-to-the-premise (FTTX) installation.
|
Mini LT Flat Drop Cable Brochure (380.53 KB)
PowerGuide® TTH (to-the-Home) Cable >>>
The PowerGuide TTH Cable is an all-dielectric self-supporting cable designed for short spans up to 300 ft. Its small diameter and low cost of installation make it an ideal solution for duct, FTTx, and aerial drop applications.
|
PowerGuide® TTH Cable Brochure (374.73 KB)
Toneable Mini LT Flat Drop Cable >>>
The Toneable Mini LT Flat Drop Cable offers a compact, durable, and easy-to-locate fiber cable in a readily accessible loose tube construction. The cable's webbed design facilitates simple, rapid cable routing and grounding of the locating wire.
|
Toneable Mini LT Drop Cable (368.79 KB)

|